An exploration of calibrating activity-based mobility demand of … – EurekAlert

Parameter calibration of the traffic assignment models is vital to travel demand analysis and management. As an extension of the conventional traffic assignment, boundedly rational activity-travel assignment (BR-ATA) combines activity-based modeling and traffic assignment endogenously and can capture the interdependencies between high dimensional choice facets along the activity-travel patterns. The inclusion of multiple episodes of activity participation and bounded rationality behavior enlarges the choice space and poses a challenge for calibrating the BR-ATA models. Till now, no formulation and solution approach for the parameter calibration of BR-ATA has hitherto been developed. To solve this problem, Dong Wang and Feixiong Liao formulated BR-ATA calibration as an optimization problem and used a simultaneous perturbation stochastic approximation method to solve it.

They published their study on January 20, 2023, in Communications in Transportation Research (https://doi.org/10.1016/j.commtr.2023.100092).

“In virtue of the multi-state supernetwork, we formulate the BR-ATA calibration as an optimization problem and analyze the influence of the two additional components on the calibration problem. Considering the temporal dimension, we also propose a dynamic formulation of the BR-ATA calibration problem. The simultaneous perturbation stochastic approximation algorithm is adopted to solve the proposed calibration problems. Numerical examples are presented to calibrate the activity-based travel demand for illustrations.”, says Dr. Feixiong Liao, a transportation scientist from the Urban Planning and Transportation Group at Eindhoven University of Technology (the Netherlands).

The BR parameter and activity participation affect the calibrations

The running times fall within [0.30, 0.40] hours when the BR parameter takes different values. Note that the ATA calibration problem needs more than 2 hours to reach the stopping condition. Regarding the influence of the number of activities, the running time decrease with the increase in the number of activities.

“We can conclude that the running times with the BR-related parameter falling within [0.05, 0.2] are relatively stable and shorter than that with a smaller parameter (i.e., 0.01 or ATA calibration problem). Besides, fewer activities always result in flows being concentrated in a specific period of time and link. The link congestion leads to more ATPs to equilibrate the OD demands.” Dong Wang, an associate professor at Qingdao University (China), explains.

Temporal and spatial dimension extensions to the BR-ATA calibration problem

The SPSA takes 8.2 hours to reach the stopping condition for the BR-ATA calibration problem in the Sioux Falls network and the calibrated demands approximate a priori values. Taking one home location for example, the study observes that the calibrated demand has a relative error of 0.01. For the BR-DATA calibration problem in the Sioux Falls network, the running time is 0.92 hours and the number of iterations is 647. All the calibrated demands approach a priori values. To further illustrate scalability in a larger network, the calibration of the BR-DATA model was carried out with the Eastern Massachusetts network. The SPSA takes more than 10 hours to complete 1000 iterations and the corresponding RMSN (a measurement of error) is as small as  0.06.

“The results demonstrate that the SPSA algorithm is feasible for the BR-ATA and BR-DATA calibration problems in sizable networks.”, Feixiong Liao says. “Nevertheless, a more effective algorithm is needed for large-scale real-world applications”, he adds.

The above research is published in Communications in Transportation Research (COMMTR), which is a fully open access journal co-published by Tsinghua University Press and Elsevier. COMMTR publishes peer-reviewed high-quality research representing important advances of significance to emerging transport systems. COMMTR is also among the first transportation journals to make the Replication Package mandatory to facilitate researchers, practitioners, and the general public in understanding and advancing existing knowledge. At its discretion, Tsinghua University Press will pay the open access fee for all published papers from 2021 to 2025.

##

About Communications in Transportation Research

Communications in Transportation Research publishes peer-reviewed high-quality research representing important advances of significance to emerging transport systems. The mission is to provide fair, fast, and expert peer review to authors and insightful theories, impactful advances, and interesting discoveries to readers. We welcome submissions of significant and general topics, of inter-disciplinary nature (transport, civil, control, artificial intelligence, social science, psychological science, medical services, etc.), of complex and inter-related system of systems, of strong evidence of data strength, of visionary analysis and forecasts towards the way forward, and of potentially implementable and utilizable policies/practices. Communications in Transportation Research is indexed in Scopus ten months after its launch.

Communications in Transportation Research is a fully open access journal. It is co-published by Tsinghua University Press and Elsevier, and co-sponsored by the State Key Laboratory of Automotive Safety and Energy (Tsinghua University) and China Intelligent Transportation Systems Association (ITS China). At its discretion, Tsinghua University Press will pay the open access fee for all published papers from 2021 to 2025.

About Tsinghua University Press

Established in 1980, belonging to Tsinghua University, Tsinghua University Press (TUP) is a leading comprehensive higher education and professional publisher in China. Committed to building a top-level global cultural brand, after 41 years of development, TUP has established an outstanding managerial system and enterprise structure, and delivered multimedia and multi-dimensional publications covering books, audio, video, electronic products, journals and digital publications. In addition, TUP actively carries out its strategic transformation from educational publishing to content development and service for teaching & learning and was named First-class National Publisher for achieving remarkable results.